MB072T2 - 11070661
Baumer_HOG11-HOG11G-T2_II_DE-EN (16A4)
2
General notes
1
1
General notes
1.1
Symbol guide:
Danger
Warnings of possible danger
General information for attention
Informations to ensure correct product operation
i
Information
Recommendation for product handling
1.2
The
incremental encoder (twin encoder) HOG 11 (HOG 11 G)
is an opto electro nic
precision
measurement device
which must be handled with care by skilled personnel only.
1.3
The expected
operating life
of the device depends on the
ball bearings
, which are equipped with
a permanent lubrication.
1.4
The expected
operating life
of the
earthing brush
depends on the electrical current and is
usually consistent with the operating life of the ball bearings.
1.5
The
storage temperature range
of the device is between -15 °C and +70 °C,
1.6
The
operating temperature range
of the device is between -40 °C (>3072 pulses per
revolution: -25 °C, optionally with heating: -50 °C) and +100 °C (restricted in potentially
explosive environments, see section 2), measured at the housing.
1.7
EU Declaration of Conformity
meeting to the European Directives.
1.8
The device is
UL approved
(not applicable for operation in potentially explosive atmospheres).
1.9
We grant a
2-year warranty
in accordance with the regulations of the ZVEI (Central Association
of the German Electrical Industry).
1.10
The encoder may be only opened as described in this instruction.
Repair or mainte-
nance work
that requires opening the encoder completely must be carried out by the
manufacturer. Alterations of the device are not permitted.
1.11
In the event of
queries
or
subsequent deliveries
, the data on the device type label must be
quoted, especially the type designation and the serial number.
1.12
Encoder components are to be
disposed
of according to the
regulations prevailing in the re-
spective country
.
Warning!
Damaging the seal
on the device invalidates warranty.
i
