Baumatic PWK1SS Pythagora, Инструкция по эксплуатации

Страница: 8 / 20

USER INSTRUCTIONS
INSTRUCTIONS FOR USE
These User Instructions should be retained for future reference and for use by a person who is
perhaps unfamiliar with the appliance.
The following models are covered by these instructions:
B60 B68 B17.5 P68 BC45
B61 B69 B17.6 P75 BF45
B62 B16.5 B17.7 P90 AS24
BT62 B16.6 PG2 PF75 AS25
B64 BG2 PWK1 B44
B67 BWK1 P62 B46
USING THE HOB
The symbols on the Control Panel fascias show which burner the Control Knob operates.
Dependent on the model there are two methods for igniting the burners.
1. Auto Ignition
After pressing in and turning the appropriate knob anti-clockwise to the large flame
symbol, the ignition spark will operate as long as the knob is pressed down.
When a flame has been established the knob can be released.
2. Manual Ignition
After pressing in and turning the appropriate knob anti-clockwise to the large flame
symbol, press the ignition button located on the control panel.
The ignition spark will operate as long as the button is held down. When a flame has
been established, release the button.
To regulate the flame, continue turning anti-clockwise to the required setting between the large
and small flame symbols.
To turn the burner off, turn fully clockwise.
NOTE:
When a Thermocouple Safety Device is incorporated in the appliance, it is necessary for the
knob to be continuously held down for a further period of approximately 10 seconds after the
flame has been established to enable the thermocouple to function.
The Safety Device is designed to stop the flow of gas to the burner head in the event of a flame
out situation.
Please note that this appliance carries the CE mark for normal domestic use and is not suitable
for the marine environment.
6