background image

 

17

you have selected, using the plus and minus 
buttons 

 

 to enter the countdown 

setting mode. The timer indicator will flash and 
the default countdown time of “10” minutes will 
appear in the display. 

 

 countdown time using the plus 

and minus buttons. Each press of the plus or 

o

 

e plus or minus button 

display, release all buttons. The display will show 

    

cally. 

o

 

A red dot will appear next to the power level 

 

ARNING: If any other cooking zones are in use they will 

o

 

You can cancel the countdown at any time by pressing the plus 

 

 
 

 

 
 
 
 

o

 

Press the timer button

 

 
 

o

 

 

Set the required

If you press and hold th

minus button will increase or decrease the time 
by 1 minute. 

 

the time will increase or decrease by 10 
minutes. 

 

o

 

When the required countdown time is shown in th

the remaining time and the timer indicator will   

 seconds before the countdown begins automati

flash for 5

 

indicator of the relevant zone.  

 

o

 

When the set countdown time has elapsed, the relevant cooking 
zone will switch off automatically.  

 
W
continue heating. You will need to switch them off manually 
when cooking is complete.  
 

and minus buttons simultaneously. The timer display will show 
“00” and the countdown will be cancelled. 

 

 

Содержание BYHI615


































Отзывы: