Baumatic BYHC602, Руководство пользователя, Страница: 17 / 24

17
o
Carefully turn the hob back over and then gently lower it into the
aperture hole that you have cut out.
o
There are holes on the base or the sides of the hob that you can
fix the four brackets to. There are three holes in each one of the
brackets.
o
You should place the
bracket on the underneath
of the hob, in a position
that is appropriate for the
aperture that you have cut
out. Using the screws
provided, fix the bracket
to the hob. These screws
MUST be securely
tightened.
Electrical connection
This appliance must be installed by a qualified
person in accordance with the latest edition of the
I.E.E. Regulations and in compliance with the
manufacturer's instructions.
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o
This appliance must be wired into a 30 a double pole switched
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. It should
not be located above the appliance and no more than 1.25m
away from it.