7.
Engage the quick attach pins (A). Verify
that pins are fully seated in the attachment
receiver plate (D). If the pins do not rotate to
the engaged position, the mount plate is not
fully aligned with the holes in the attachment
receiver plate. Check the receiver plate and
clean it if necessary.
A
D
^
WARNING
Prevent death or serious injury.
Attachment could fall off of the skidsteer
if pins are not fully seated through
attachment mount plate.
Verify quick attach pins are fully seated
in the attachment mount plate.
Connect Hydraulics
^
WARNING
Pressurized fluids can penetrate the
skin.
Hydraulic hoses can fail from age,
damage and exposure.
Use body and face protection while
searching for leaks. A tiny, almost
invisible leak can penetrate the skin,
thereby requiring immediate medical
attention.
Use wood or cardboard to detect
hydraulic leaks, never use your hands.
^
WARNING
Burn hazard.
Hot and high pressure hydraulic oil.
Allow oil to cool before touching
components.
If the attachment requires hydraulics for operation,
connect hydraulic hoses as follows:
1.
Engage park brake and stop engine.
2.
Remove protective covers from hydraulic
couplers. Verify that hydraulic connectors are
clean.
3.
Move auxiliary hydraulic lever into forward
detent position and connect male connector
into female connector on the skidsteer.
4.
Move auxiliary hydraulic lever into rearward
detent position and connect female connector
onto male connector on the skidsteer.
19
