Baumalight STUMP BLASTER S24 страница 6 Скачать руководство пользователя

Страница: 6 / 36

2.2 Operational Hazards

WARNING

Prevent serious injury or death�

Read and understand this manual before

operating stump grinder�

Always stop engine and remove key

before leaving operators seat�

Never allow anyone near the stump

grinder during operation�

Travel at a safe speed�

WARNING

Prevent serious injury or death from

moving parts�

Moving parts can crush and dismember�

Do not operate without guards and

shields in place�

Disconnect and lock out power source

before adjusting or servicing�

WARNING

Use stump grinder only for the designed

applications�

Any other use may result in personal

injury, damage to equipment and may

void the warranty�

WARNING

Prevent serious injury or death�

Verify stump grinder is attached to skid

steer before operation or transport�

Carefully read all safety messages in this manual

and on equipment safety signs. Keep safety signs

in good condition and replace missing or damaged

safety signs.

New equipment components and repair parts must

include the current safety decal.

Learn how to properly operate equipment.

NEVER operate or work around this equipment

without proper instruction, while fatigued or under

the influence of alcohol, prescription or non-

prescription medication or if feeling ill.

Keep your equipment in proper working condition.

Know the regulations and laws that apply to you

and your industry. This manual is not to replace

any regulations or laws. Additional information

may be found at: www.asae.org or www.osha.gov.

If you do not understand any part of this manual,

contact Baumalight at 866-820-7603.

Prepare for Emergencies

• Be prepared in case of emergencies.
• Keep a fire extinguisher and first aid kit close

to the machine.

• Keep emergency phone numbers close to your

phone.

• Know your address so emergency services

can locate you if an emergency arises.

Содержание STUMP BLASTER S24





































Результаты поиска

Содержание STUMP BLASTER S24

Отзывы:

Похожие инструкции для STUMP BLASTER S24

Бренды по названию

Популярные бренды

Baumalight STUMP BLASTER S24, Руководство оператора

Результаты поиска

Содержание STUMP BLASTER S24

Отзывы:

Похожие инструкции для STUMP BLASTER S24

Бренды по названию

Популярные бренды