Product Overview
Troubleshooting
Have you got everything?
Unpack the box and make sure all
of these items are there:
Note: only one powerboard
(white/black) is supplied
.
User Guide
Model: ASPP8-0421-W, ASPP8-0421-B
8-Way Surge Powerboard
A. 8-Way Surge Powerboard
B. User Guide
C. Warranty Certificate
Active Power LED Indicator
When lit, the green light indicates that the
powerboard is active and ready for use.
Surge Protected LED Indicator
When lit, the red light indicates that all
connected devices are surge protected.
Overload Circuit Breaker (Resettable)
Protects against current overload at 10 amps.
USB Charging Ports
For charging phones, tablets or other devices.
AC Sockets
All 8 sockets are the same protected sockets
and can be used interchangeably.
TV Line Protection
Protects the TV line against power surges.
Power On/Off Switches
Press to supply/cut off power to the outlets.
Give us a call
What? You mean this User Guide didn’t have ALL the answers? Speak to us!
We’d love to help you get up and running as quickly as possible.
Call our
After Sales Support
on
1300 886 649
.
Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST
No power
output from
one of the
sockets
• Try other sockets. If the other sockets have power output, it’s probably
the contact of one faulty socket that is loose or not connected; avoid
using that socket.
No power
output from
any of the
sockets
• Check that the power switch is turned on (you can try to turn it on and off
a few times to make sure it’s switched on) and that the Active Power LED
Indicator is lit green.
• Check the overload circuit breaker button to see whether it’s tripping,
push it down to reset the circuit breaker.
• Make sure the input socket for the powerboard has power output.
No output
from the USB
ports
• Check that the USB cable is connected securely to the USB port and/or
try a different USB port.
• The total output current for the USB ports are 2.1A. Remove devices
using the other USB ports.
• Use another USB cable.
Powerboard is
not turning on
• Check that there is no visible damage to the plug or cord.
• Ensure that the devices connected do not exceed the total maximum
load (2400W, 10A). If exceeded, unplug the devices and press the
overload reset button.
The TV cable
signal is weak,
or there is no
signal at all
•
Check the two cable connectors are firmly connected to the ANT-IN
and ANT-OUT ports (located on underside of powerboard) ; you can try
unplugging them and then plugging them back in; also turn the cable
connector clockwise or counterclockwise to help make better contact for
the connectors.
• Disconnect the cable and connect your TV directly to the wall ANT
socket to make sure its not an issue with the source signal.
Well done, you made it.
Now sit back and relax... your powerboard is automatically
covered by a 1-year warranty.
How nice!
1
1
2
2
3
4
4
5
Enjoy using your powerboard!
3
6
6
7
7
