2
Operating Manual for
FAN Press Screw Separator PSS 1.1-300
S
1.4 QUALIFIED OPERATORS
These are persons who on behalf of their training, experience and instruction as well as their knowledge
of relevant standards, rules, precautions to be taken for accident prevention and prevailing operating
conditions have been authorized by the person in charge of system safety to perform the respective
tasks required and in doing so are able to recognize and avoid potential hazards. The statutory minimum
age for the operating and maintenance personnel must be observed. Among other things, knowledge of
first aid procedures is also required.
1.5 INTENDED USE
The FAN press screw separator is designed exclusively for solid liquid separation in agricultural ap-
plications (intended use).
Any use of the machine beyond this intended use is considered non-conforming. The manufacturer
is not liable for damage resulting from such non-conforming use, the sole liability for damage from
non-conforming use lies with the user.
Intended use also includes compliance with manufacturer
’
s operating, maintenance and service in-
structions.
The FAN press screw separator may be used and operated only by persons who are familiar with
the system and aware of the hazards involved.
All relevant rules for accident prevention as well as any other generally accepted rules and regula-
tions relating to safety, occupational medicine and traffic laws must be strictly observed.
Unauthorized modifications to the machine release the manufacturer from liability for damage re-
sulting from such modifications.
1.6 UNAUTHORIZED MODIFICATION AND MANUFACTURE OF REPLACEMENT PARTS
Modifications or alterations to the machine are only permitted after consultation with the manufacturer.
Original replacement parts and authorized accessories from the manufacturer serve the interests of
safety. The use of other parts voids the manufacturer
’
s liability for any resulting consequences.
The replacement parts used must correspond to the technical requirements established by the manufac-
turer of the system. The replacement and wearing parts delivered with the machine or via subsequent
orders satisfy this condition.
1.7 DISPOSAL
The machine must be disposed of according to the local disposal regulations.
The user must ensure safe and environmentally friendly disposal of operating materials and ancillary
materials as well as replaced parts. Dispose of oil, grease, and filters in accordance with regulations!
