Baudouin 12M26 Series, Руководство по эксплуатации и обслуживанию

Страница: 62 / 83

O&M Manual for PowerKit
M26 Series Diesel Engine
62
5.4.2 Engine Start-up after Long-term Storage

Drain the residual 30/M protective oil from the sump.

Add the type and quantity of lubricant oil to the engine as specified in the REFILLING
table.

Drain the protective fluid CFB from the fuel circuit bringing to a close the operations as
indicated in point 3 of the PREPARATION OF THE ENGINE FOR A LONG PERIOD OF
INACTIVITY .

Remove the plugs and/or seals from the engine's intake, discharge, ventilation and
bleeder holes, and restoring normal conditions of use. Connect the turbocharger intake
inlet to the air filter.

Join the fuel circuits to the machine's tank bringing it close the operations as indicated in
point 4 of the PREPARATION OF THE ENGINE FOR A LONG PERIOD OF INACTIVITY .
During the filling operations, connect the tank fuel return pipe to a collection container to
prevent the residual protective liquid from flowing into the tank.

Check and fill the engine with coolant as required, degassing if necessary.

Start the engine and let it idle until completely stabilized.

Check that the indications on the dashboard are suitable and that there are no alarm
signals.

Stop the engine.

Remove the warning notices of ENGINE WITHOUT OIL from the engine and dashboard.