bathstore Comfort Cushion, Инструкция пользователя

Страница: 12 / 20

12
• After use, drain the bath water and release
the suction cups from the floor of the
bath. Do this by lifting the rim of a pair of
suction cups (fig. 12) to release the suction
between suction cup and bath.
• Tilt the Comfort Cushion so that the
released suction cups do not re-adhere to
the surface (It helps to place a small towel
beneath them to stop them re-adhering to
the bath).
• Release the remaining pair of suction cups
by lifting their rims as before.
• Remove the Comfort Cushion from the bath
and disconnect the air hose.
NOTE:
To deflate the Comfort Cushion
when
not sitting on it
, disconnect the air hose. The
Airflo 12 compressor will not suck air from
the Comfort Cushion. To speed up deflation,
apply some weight to the Comfort Cushion by
pressing down on it.
For ease of carrying and hanging up for
storage, fold the Comfort Cushion as indicated
(fig. 13) and pass the ‘handle’ (
C
) through the
slot between the seat and backrest.
C
To remove the Comfort Cushion from the bath
12
13