Customer Services
t: 01225 303900
Before you start
It is recommended that the unit and basin are secured to a suitably reinforced wall to ensure stability. Place the furniture
unit in the desired position. Secure unit to the wall through the pre-drilled holes in the rear brace using fixings suitable for
the wall surface (not supplied). If in any doubt please consult an expert.
Wear suitable eye protection when drilling. Take care when using power tools near water - the use of a residual current
device (RCD) is recommended. Beware of hidden pipes or cables. Take care when drilling tiled surfaces as the drill might
slip. Use a piece of masking tape to prevent the drill from wandering.
Installation and Fitting Instructions
Floor Mounted Unit
PL5010. x, PL6010.x, INST04102x
Please retain for future reference
Hinge Adjustment
1
2
Once the basin is plumbed in finish by securing to the washstand with a silicone sealant (not supplied).
Fitting Basin
Quick
release
mechanism
B
A
1
1
2
2
To make
adjustment 1
simply turn screw
B
To make
adjustment 2
simply turn screw
A
11/16 .V2
