5
5. Close seat and cover.
Tap forward and let the
seat and cover close by themselves.
6. Adjust seat.
With the cover closed, adjust seat by the moving bases and seat
together. (Loosen screws further, if necessary.)
Hand - tighten wing nuts
.
(
P
ut fing
er
or thumb on screw head to
prevent
screw from turning
.
)
NOTE:
Be sure seat does not move.
Tip:
We recommend installing the seat
overhanging the front of the bowl by 1/4
inch. That way, users can lift it without
touching the toilet bowl.
6
NOTE:
If posts are not perfectly aligned and inserted
at the same time, one post may “lock” into place. If
this happens, don’t try to unlock or remove the seat.
Instead, move the base(s) so the second post can be
inserted.
4
4. Attach seat.
Gently lower the seat (holes) onto the mounting posts. (You may hear
a “click” as the buttons pop out, locking the release mechanism.)
NOTE:
The Quick Release mechanism is unlocked by pushing the buttons “in”. (If
buttons are pushed before attaching seat, don’t worry, they will pop “out” when you
attach the seat.)
