Bastl Casper IKARIE, Руководство пользователя

Страница: 12 / 21

FOLLOW listens to the input after the INPUT knob control, so
adjusting the INPUT knob will affect the amplitude of the FOLLOW
output as well.
INPUT
SIGNAL
ENVELOPE FOLLOWER
RESPONSE
SLOW
MID
FAST
10 BEYOND
Because the two filter signals get subtracted, the resulting spectrum
also gets subtracted. Therefore, you can only hear the signal in-
between the two cutoff frequencies. That constitutes a flexible band-
pass filter, where the STEREO knob in SPREAD mode would define
the width of the band-pass filter. Both border cutoff frequencies of
such a filter can have resonant peaks when RESONANCE is engaged.
This filter topology is often referred to as the twin peak filter.
The BEYOND output can also be used in conjunction with L OUT to
create surreal stereo images, or it can be used to modulate any of
the filter parameters.
When listening to the BEYOND output and using the STEREO
modulation in the PAN mode, you will effectively obtain a ring modulator
on the output of the filter. Use a slow CV to achieve tremolo effects,
or use audiorate signals to get ring-modulated tones.
20KHZ 20KHZ FREQUENCY FREQUENCY
L OUT (MONO)
LEFT CUTOFF LEFT CUTOFF RIGHT CUTOFF RIGHT CUTOFF
BEYOND OUTPUT
LOUDNES
S
LOUDNES
S
20HZ 20HZ
SPECTRAL SPECTRAL DIFFERENCE ADDITION