BP-CHTX
FAUTEUIL DE DIRECTION CHAPMAN
INSTRUCTIONS DE MONTAGE
BP-CHTX
CHAPMAN EXECUTIVE CHAIR
OPERATING INSTRUCTIONS
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vous assurer que les quantités
des pièces sont correctes.
ÉTAPE 1
Insérer les cinq Roulettes (2) dans la Base (1). Pousser fermement jusqu’à ce que les Roulettes (2) s’encliquettent. Insérer le Vérin
pneumatique (3) dans la Base (1). Glisser le Soufflet (4) sur le Vérin pneumatique (3).
ÉTAPE 2
Fixer la Plaque du siège (5) au Coussin du siège (6) avec la flèche vers l’avant du siège. Fixer la Plaque du siège (5) au Coussin du siège (6) avec
quatre Grande rondelles plates (10) et quatre Vis courte (11).
RESSERRER COMPLÈTEMENT TOUTES LES VIS AVEC LA CLÉ
ALLEN (14).
ÉTAPE 3
Fixer le Support du dossier (13) au bas du Coussin du siège (5) avec quatre Grande rondelles plates (10) et quatre Vis courte (11).
RESSERRER COMPLÈTEMENT TOUTES LES VIS AVEC LA CLÉ ALLEN (14).
ÉTAPE 4
Fixer les Bras (8L et 8R) au Coussin du siège (6) avec deux Petites rondelles plates (9) et deux Vis longues (12) pour chaque Bras (8),
RESSERRER COMPLÈTEMENT TOUTES LES VIS AVEC LA CLÉ ALLEN (14).
Couvrez les trous des accoudoirs (8L et 8R) au moyen de
4 capuchons en plastique (15)
ÉTAPE 5
Placer le siège assemblé sur le Vérin pneumatique (3) et mettre de la pression vers le bas.
ATTENTION : AVANT D’UTILISER LE FAUTEUIL, VOUS ASSURER D’AVOIR RESSERRÉ COMPLÈTEMENT TOUTES LES VIS.
11
13
10
6
5
DÉTAIL A
PIÈCE QTÉ
1. Base . . . . . . . . . . . . . . . . . . . . . . . 1
2. Roulettes . . . . . . . . . . . . . . . . . . . . 5
3. Vérin pneumatique . . . . . . . . . . . . 1
4. Souflett . . . . . . . . . . . . . . . . . . . . . 1
5. Plaque du siège . . . . . . . . . . . . . . . 1
6. Coussin du siège . . . . . . . . . . . . . . 1
7. Coussin du dossier . . . . . . . . . . . . 1
8. Bras (8R et 8L) . . . . . . . . . . . . . . . 2
9. Petite rondelle plate . . . . . . . . . . . . 4
10. Grande rondelle plate . . . . . . . . . 8
11. Vis courte . . . . . . . . . . . . . . . . . . . 8
12. Vis longue . . . . . . . . . . . . . . . . . . 4
13. Support du dossier (préinstallé) . . 1
14. Clé Allen (non montré) . . . . . . . . . 1
15. Capuchon en plastique . . . . . . . . 4
2
FEATURE
• HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever
(1) . To lower seat height sit on chair and lift lever(1) .
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped
with an adjustment that will allow the user to change
the tension of the tilting feature . Turn knob (2)
clockwise to increase tension and counter-clockwise
to decrease or ease the tension . To lock return chair
to the upright position and push lever (1) in . To unlock
pull lever (1) out .
NOTE: Be careful not to loosen back tilt adjustment knob
completely .
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic
cover as head covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
LIMITED WARRANTY
Inspired by Bassett
®
chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 5 Years on upholstery fabric and foam against wear and deterioration.
• We can not warrant leather against routine scratching and scuffing, as all leather is subject to minor blemishes in normal use.
To make a warranty claim, contact Parts Department. Provide model number and description of the problem and obtain return authorization.
At it’s option Inspired by
Inspired by Bassett
®
will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory.
Return freight on components still in warranty will be paid by
Inspired by Bassett
®
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons
weighing 250 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism,
rusting, acts of nature or any other event beyond the control of Inspired by Bassett
®
. The warranty does not cover cosmetic damage that may
result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of this
product. When usage is more than 40 hours per week, a five year warranty on all parts applies. Fabric and foam is warranted for one year.
This
warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Our quality standards are among the highest in the industry . Sometimes, no matter how hard we try, there are times
when parts are damaged or missing . Our Parts Department will do everything possible to promptly remedy the
problem . Contact us via e-mail
by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262,
Monday through Friday 8:00 a .m . - 5:00 p .m . Pacific Time
.
© Office Star Products Mars 2013
1
2
1
2
3
4
5
6
7
8R
8L
12
9
9
12
10
11
