4-16
920512-768
Operator Manual
Operating Instructions
4.10 Shutdown
There is no Shutdown mode on the Basil 5700LSR Cage and Rack
Washer. Washer should remain
ON
at all times except when per-
forming maintenance or repairs, then operator needs to lockout/
tagout main electrical disconnect switch to
OFF
position.
4.11 Purge Travelers
Travelers can be PURGED after cleaning wash chamber spray
headers or whenever necessary.
1.
In Mode Selection screen, press
MANUAL
touch pad.
2.
In Manual screen, press
PURGE TRAVELERS
touch pad.
Purge starts.
NOTE: Purging travelers also purges Rinse Tank (tank 2).
Perform purge before draining tanks.
3.
Once purge finishes, press
X
touch pad until Mode Selection
screen appears.
4.12 Drain Cycle
DRAIN cycle can be performed whenever necessary:
•
After processing a heavily soiled load to evacuate reused water
from wash tank(s);
•
between different load types (debris pans or feeder bottles, for
example) to evacuate reused water from wash tank(s);
•
after cleaning wash chamber to rinse off cleaning solution.
IMPORTANT:
At the end of a work session, washer should be
completely drained.
1.
In Mode Selection screen, press
MANUAL
touch pad.
2.
In Manual screen, press
DRAIN
touch pad.
3.
In Drain screen, press the name of desired tank to drain.
NOTE: It is possible to drain one tank only or select all tanks at
once. In this case, draining will be performed consecutively.
4.
Press
X
touch pad to return to Manual Mode screen.
