BAIT GUN 345
The design of this applicator utilises negative air pressure to pull bait through the
bait gun to ensure control of each bait placement. The sturdy features of this well
designed and ergonomic tool make the Goliath
®
Gel Bait Gun 345 convenient and
easy to use.
Key
1.
Clear application tip
2.
Piston
3.
Cartridge
4.
Hooks
5.
Handel
6.
Settings
7.
Selection button
8.
Push Stick
9.
Threaded nozzel
To Begin An Application
1. Insert the clear appliation tip [
1
], into the threaded nozzel [
9
] by turning
clockwise until finger tight.
2. Adjust the selection button [
7
] to setting to 1 at the base of the applicator
handle.
This step is important to prime the applicator.
3. Insert the cartridge [
3
] into the cartridge chamber by
gently
pressing forward
and down until the base of the flange end of the cartridge is seated in the
hooks [
4
].
NOTE:
During the initial loading process, the cartridge will engage the pumping
mechanism of the piston. This may result in the product being pushed into the application
tip.
*
If the cartridge is inserted into the chamber with force, the bait may be pushed through the
application tip which could result in the loss of a minimal amount of product.
*
To avoid discharge of product, insert the orange reservior cap onto the threaded nozzel [
9
] while
you change reservoirs.
[Type a quote from the document or
the summary of an interesting point.
