Installation Manual
ASANO P4a
© 2018 basalt
e v1.0
1
Power supply (230V AC)
2
Loudspeaker output
a Zone 1
b Zone 2
c Zone 3
d Zone 4
3
Analogue input
a Source 1
b Source 2
c Source 3
4
Audio network
5
Cooling Fan
6
Service
Before operating the unit, please read this
manual thoroughly and retain it for future
reference.
Model No. 700-14
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
Description
Asano P4a is a networked 4-zone amplifier, each zone output powered with 2x125 W amplifiers. It can connect 3
analogue audio input sources.
Asano P4a can only be used in combination with S4. The S4’s integrated KNX control allows you to integrate the Asano
P4a in a KNX system.
LED feedback
The Asano P4a front panel has a feedback LED which indicates following statuses:
• Blue: standby mode
• White: at least one output zone amplifier is active.
• Red flashing: device failure detected related to power supply or amplifier.
• Purple flashing: digital clipping or issues with the audio network.
1
2
4
3
6
3
2
c
d
5
c
