- 39 -
Device start-up
Connect the device to a single grounded socket.
A signal is heard and the
ON/Standby
LED indicator comes on. The device is in
the STANDBY mode now.
To start the device, press
ON/OFF
button
.
ON/Standby
LED indicator will start flashing.
Settings
Power
When the ON/OFF button
has been pressed the power level LED indicator is on.
The control panel shows the
power level default setting “5“
and the device starts.
The
ON/Standby
LED incidator stays lit at all times.
NOTE!
If new settings are not selected within 30 seconds after pressing the ON/OFF
button
, the device will automatically switch back to the Standby mode.
Using the buttons
or
you can change settings within the range
(500 W -
3500 W) at any time. Power level
1
corresponds to 500 W, and level
10
corresponds
to 3500 W of power output.
The digital display shows the selected power level.
Temperature
To switch to the temperature mode, press the time setting button . The temperature
LED indicator will come on.
The device will switch to the factory-set
temperature of 120 °C
which is then
displayed on the digital display.
Using function buttons
or
the temperature may be changed within the range
from 60 °C to 240 °C. Possible temperature settings:
60, 80, 100, 120, 140, 160, 180, 200, 220 and 240 °C.