Bartscher Flex 7360, Инструкция по эксплуатации

Страница: 17 / 32

Installation Instructions
1583011 15 / 32
EN
5 Installation Instructions
5.1 Installation
CAUTION!
Incorrect installation, positioning, operation, maintenance or misuse of
the appliance may lead to personal injury or property damage.
Positioning and installation, as well as repairs may be performed by
authorised technical service only and in compliance with the applicable
national law.
NOTE!
The manufacturer disclaims all liability and provides no warranty for
damages, which may be attributed to non-observance of regulations or
incorrect installation.
Observe all provisions of law, guidelines and regulations during installation:
– Regional or local safety regulations and construction law provisions
– Accident prevention acts in force
– Fire prevention provisions
– Respective IEC provisions
– DVGW G600 (TRGI), 'Technical regulations for gas installations'
– TRF, 'Technical regulations for liquid gas'
– Directive and regulations of a gas supplying company (EUV)
– DVGW G 634, 'Installation of commercial kitchen appliances for
combustion of gas fuels'
– Respective legal regulations
Preparation for Installation
• For these appliances are assigned to type A1 (no fixed connection with
building's chimney or installation under venting extractions or ceilings), it is very
important to provide for proper ventilation of the installation room. Instructions
provided in DVGW G634 sheet should be observed.
• A room, in which the appliance is installed, should contain the amount of air
necessary for burning gas according to regulations in force. For proper burning,
the required air inflow may not be lower than 2 m
3
/h per kW of appliance's rated