Possible Malfunctions
A120792
23 / 26
EN
7
Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
Error
Possible Cause
Solution
The appliance is
connected to the power
supply, but digital
displays of the push/
rotary control knobs do
not show any values.
Plug improperly
inserted into a socket.
Remove the plug and insert it
properly in the socket.
The appliance is in
Standby mode.
Press one of the push/rotary
control knobs.
The appliance is
connected to the power
supply, but it does not
heat up.
Temperature is not set. Set the temperature.
Damaged heater.
Contact the service
company.
The appliance is
connected to the power
supply, but it does not
work.
Overheating protection
triggered.
Wait for the appliance to cool
off. Press the RESET button
at the rear side of the
appliance. If the overheating
protection triggers again,
contact the service company.
Cooking/baking effect is
not uniform.
Damaged fan.
Contact the service
company.
Thermostat broken.
Contact the service
company.
Top clearance
between food and the
GN container is too
small.
Maintain clearance of at least
40 mm.
Содержание A120792
Страница 1: ...AT211 MDI A120792 ...