Bartscher 7450 2E, Руководство пользователя

Страница: 18 / 22

Cleaning
16 / 22 700221
EN
Automatic Defrosting
The appliance defrosts automatically 4 times over a 24-hour period.
Initiation of Manual Defrosting/Finishing Defrosting Process
If cooling efficiency drops, e.g. after a prolonged period opening door, manual
defrosting is required.
1. Press the button and hold it pressed for 6 seconds, to initiate defrosting or
finish this process.
The defrosting LCD indicator light is lit.
2. Press the button and hold it pressed for 6 seconds, to finish the defrosting
process.
The defrosting LCD indicator light goes off.
Temperature Controller Reset
If the display shows a fault message:
1. Press the button and hold it pressed for 2 seconds, until the buzzer sounds.
2. Press the button and hold it pressed for 6 seconds, until the buzzer sounds
again.
The digital display blinks for 3 seconds while factory default settings are restored.
Switching the Appliance Off
1. When the appliance is not to be used any more, it should be switched off with
the ON/OFF switch located at the back wall.
2. Unplug the appliance.
6 Cleaning
6.1 Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.