Cleaning and Maintenance
18 / 22
271107
EN
6
Cleaning and Maintenance
6.1
Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2
Cleaning
Housing
1. Wash the appliance regularly.
2. Wipe the housing with a damp, soft cloth. Use mild cleaning agent if required.
3. For deposits, use plastic or wooden spatula.
4. Dry washed surfaces thoroughly afterwards.
Flame Protection Filters
If the extractor hood is used daily, flame protection filters must be cleaned at least
once a week.
1. For the purpose of cleaning, flame protection filters and partitions (should they
be fitted) should be removed from the appliance.
2. Remove flame protection filters, holding them by a handle and moving them
upwards, so that they slide out of the bottom guide-rail. Rotate the flame
protection filters slightly downwards to remove them completely.
3. Flame protection filters and partitions (should they be fitted) should be washed
in hot water bath with an alkaline cleaning agent or in a dish-washing machine.
4. If needed, remove deposits using a soft brush for dish-washing.
5. Thoroughly dry flame protection filters.
Re-assemble in reverse order.
