Bartscher 150121, Оригинальное руководство пользователя

Страница: 14 / 18

Installation and operation
12 / 18 150121
EN
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• Do not use the appliance with an external timer or remote control.
5.2 Operation
Instructions for Detachable Temperature Controller
CAUTION!
Use only the temperature controller delivered with this multi pan. Never
use any other temperature controllers.
Make sure the temperature controller is firmly fit in the socket. If the
temperature controller is connected incorrectly, improper heating may
occur, leading to operational malfunctions and damages due to
overheating of the appliance.
If any operational malfunctions occur, pull the plug out and stop using the
appliance. Contact the retailer or the supplier.
• Temperature controller is a very sensitive component. Always make sure it is
not dropped, subject to hits nor strong shocks.
• Temperature sensor and socket contacts should always be kept dry and clean.
• Do not place the temperature controller on the pan’s bottom. It may not come in
contact with the heating plate.
• When removing the temperature controller from the socket pull the plug, not the
cord. Do not use excessive force when inserting or removing the temperature
controller.
Operation of Multi Pans with Non-Stick Coating
The pan’s surface is covered with a non-stick coating. Observe the following
indications:
– do not use any sharp or pointed metal implements;
– use paddles that are either wooden or made of plastic resistant to high
temperatures;
– never use sharp knives to cut dishes directly in the pan. Arrange the dish
on a plate and proceed to cutting it.