- 43 -
7. Possible Malfunctions
In case of malfunction, disconnect the device from its power source. Before contacting
the service or sales agent, verify - based on the table below - whether it is possible to
eliminate disruption in operation.
PROBLEM
POSSIBLE CAUSES
SOLUTION
The device is switched
on, but does not heat up.
The device is plugged to
the power socket.
Timer switch is not set.
Temperature control is
not set.
Connect the power plug
to an appropriate power
socket.
Set the time.
Set the temperature.
„Metal“-sound during
operation.
Fan is not set correctly.
Contact your retailer.
The device does not
generate any steam.
Not enough water in the
water tank.
Fill the water tank.
The foods are burnt
despite correctly set
baking/ cooking times.
Fan is defective.
Temperature control is
defective.
Contact your retailer.
Contact your retailer.
If you cannot remove the malfunctions:
-
do not open the body,
-
notify the customer service point or contact the sales
agent, while providing the following information:
type of malfunction;
article and serial number (rating plate at the
rear of the device).