EN
page 35
9. ENVIRONMENTAL ASPECTS
9.1 Packaging
Packaging is made of the following components:
•
a wooden pallet;
•
a nylon sack (LDPE);
•
a multi-layer carton;
•
polystyrene (PS) strips;
•
polypropylene (PP) banding.
All above materials, shall be disposed and treated in accordance with the Local Laws in force.
9.2 Disposal
The symbol WEEE/RAEE used on this product indicates that it cannot be treated as domestic waste. Proper
disposal of this product contributes to protecting the environment. For more information on product recycling,
contact the local authorities, domestic waste authorities or the dealer where the product was purchased.
For product or parts disposal, follow the Council directives 2011/65/UE and 2012/19/UE as amended and/or
application legislative decrees.
The present product or parts cannot be disposed of as urban waste but shall be collected in separate containers (see the
waste bin on wheels symbol with an “X” on the product).
At the time of product disposal, the user shall refer to the waste electrical and electronic equipment (WEEE/RAEE) specifi cation.
The manufacturer guarantees the absence of dangerous substances in the EEA used in conformity to the directive 2011/65/UE.
If the user does not comply with the regulations he/she shall be subject to the penalties foreseen by each member state.
Disconnect electricity and water before disposal.
Cut away the electrical cable to ensure that further use is impossible.
All metal parts are recyclable as they are made of stainless steel.
Recyclable plastic parts are marked with the plastic material symbol.
TYPE OF ALARM
CAUSE
REMEDIES
B2
BOILER PROBE FAIL.
Contact Technical Service
B3
BOILER HEAT. ALARM
Contact Technical Service
B5
BOILER OVERHEATING
Contact Technical Service
E1
WATER LOAD FAILED
Open the water supply valve and check the overfl ow pipe
E2
TANK PROBE FAIL.
Contact Technical Service
E3
TANK HEATING ALARM
Contact Technical Service
E5
TANK OVERHEATING
Contact Technical Service
E6
TANK DRAINING FAIL.
Check the overfl ow pipe. Contact Technical Service
Table 3
Type of Problem
Possible Causes
Cure
The machine does not
turn on.
Main switch not ON.
Turn switch ON.
The machine does not
load water.
Water valve shut.
Open the hot and/or cold water valve.
Rinse area nozzles or solenoid-
valve fi lter blocked and/or scaled
with limestone.
Clean the rinse arm nozzles, piping and solenoid-valve fi lter.
Defective pressure-switch.
Replace pressure-switch.
The display will flash
ALARM
See chapter
8 Alarms
.
---
10. TROUBLESHOOTING