
EN
page 29
3.4 Rinse aid use
The machine has a standard rinse aid dispenser. The machine automatically sucks the product.
The rinse-aid chemical, shall be suitable for professional dishwashers.
The recommended amount is 2-5 cm of product measured on the suction hose.
1 cm of the product drawn into the hose is equal to about 0.13g. A correct amount of rinse aid is very important
for a quick and proper drying.
NB:
Excessive amount of chemicals or foam will reduce wash pump effi ciency.
3.5 Drain pump system (optional)
To drain completely the wash-tank keep the machine OFF, extract the overfl ow pipe and shut the door.
After that, press the key
L
till the display will show
TANK DRAINING
.
The discharge pump will automatically drain the wash-tank. After the draining is complete, the machine will turn automatically
in
STAND-BY
mode.
If you want to refi ll the machine for a new cycle, see par
3.1 Machine start-up
.
The drain pump will operate also during the rinse cycle, to drain the water in excess from the wash tank.
RINSE-AID
TANK DRAINING
stand-by
WARNINGS:
• Do not slam the door when opening and closing.
• Do not put material or objects on the machine.
• The machine has an IPX3 protection rating against accidental water splashes and is not protected against pressurized
water jets. Pressure-cleaning systems shall, therefore, not be used on this machine.
• Do not dip bare hands into water containing detergent. If this should occur, wash them immediately with plenty of water.
Check the safety instructions on the detergent container.
• Some important rules must be followed for using this appliance:
1) never touch the appliance with wet hands or feet;
2) never use the appliance when barefooted;
3) do not install the appliance in places exposed to water splashes.
• This machine must be disconnected from the main electrical supply after use at the end of the day and for any
service/maintenance operation. Switch off the main switch located on the wall, which shall be installed by a
professional installer. Shut the water supply valve(s).
• Do not cover the intake or dissipation grids.
• Do not use water to extinguish fi res on electrical parts.
WARNING: INTERNAL CLEANING OF THE MACHINE SHALL BE CARRIED OUT AT LEAST 10 MINUTES AFTER THE
POWER SWITCH HAS BEEN TURNED OFF.
WARNING: DO NOT INSERT HANDS AND/OR TOUCH THE PARTS LOCATED AT THE BOTTOM OF THE WASH TANK
AND/OR AT THE END OF THE WASH CYCLE.