background image

BARTINGTON INSTRUMENTS

 

Page 10 of 13 

OM2442 iss 2

8. Care and Maintenance

No user repair or servicing is possible beyond the steps listed below and in 

Section 7: 

Troubleshooting

.

Note: 

The Mag613 contains no user serviceable parts. Attempts to dismantle, modify or 

repair the magnetometer will invalidate the Warranty.

8.1. Cleaning the Mag613

Caution:

 Avoid using chemicals, such as solvents, when cleaning the Mag613. Use a cloth 

wetted with soap and water to remove grime from enclosures.

8.2. Calibration

Periodic calibration of the Mag613 is not required. If a fault is suspected, the sensor should be 
returned to Bartington Instruments for inspection and repair or replacement.

8.3. Storage

Caution:

 Do not store the Mag613 in temperatures outside the range specified in 

brochure 

DS1854

.

Caution:

 Avoid storing the Mag613 in areas with magnetic fields above the range of the 

magnetometer (refer to 

brochure DS1854

).

Caution:

 Avoid storing the Mag613 with abrasives, corrosive chemicals or solvents.

8.4. Transport

The Mag613 system is a precision electronic instrument and should be treated as such.

Note: 

Bartington Instruments supplies its products in appropriate packaging for 

transporting. This packaging should be used for any future transport.

Note: 

Avoid bending cables through angles greater than the minimum bend radius as 

specified in 

brochure DS1854

.

Note: 

Avoid excessive exposure to high temperatures, vibration or shocks.

Содержание Mag613














Отзывы: