background image

BAR  H

Elektronik GmbH

®

11/11
9021-0020-A
12.04.2017
A

Page:
Document:
Date:
Revision:

Mini-PLC
STG-810/820
Art. No. 0850-0810/820

MANUAL

© 2016-2017 BARTH Elektronik GmbH | Im Depot 1-3 | D-49838 Lengerich | www.barth-elektronik.de
® BARTH is a registered trademark. All rights reserved.

9021-0020-A

4.1.8  Timebase (oscillator)

Primary Oscillator

Crystal quartz MEMS unit
(precise ‚micro-electro-mecha-
nical system‘)

Nominal Frequency

16.000 MHz

Frequency tolerance

±50 × 10

-6

Frequency aging

±5 × 10

-6

 / year max.

4.1.9  Electrical connection

Electrical Connection

plugable spring terminal
connectors 0.25 to 1.5 mm²

Manufacturer: Phoenix Contact
Series: COMBICON
Type: FMC1,5/x-ST-3,5-BK

4.1.10  Electromagnetic compatibility (EMC)

Electrostatic discharge
(ESD) on IN1 to IN5

20 kV air discharge
30 kV contact discharge
(IEC/EN 61 000-4-2, level 3)

Electrostatic discharge
(ESD) on OUT1 to OUT5

8 kV (human body model)
(MIL-STD883D)

Electromagnetic fields

Field strength 10 V/m
(IEC/EN 61000-4-3)

CAN bus terminals
(CANH, CANL to GND)

IEC 61000-4-2:
Unpowered Contact Discharge
±15000 V

IEC 61000-4-2:
Powered Contact Discharge
±8000 V

4.1.11  Environmental conditions

Operation temperature

-40 to +70 °C
(IEC 60068-2-1/2)

Storage temperature

-40 to +70 °C
(IEC 60068-2-1/2)

Relative humidity

5 to 95% non-condensing
(IEC 60068-2-30)

Air pressure (in operation)

500 to 1500 hPa

Shock resistance

min. 100 m/s²
(IEC 60068-2-27)

Vibration resistance

min. 50 m/s² @ 10..100 Hz
(IEC 60068-2-6)

Degree of protection

IP 20, limited by connectors
(EN 50178, IEC 60529)

Drop

Drop height: 1000 mm
(IEC 60068-2-31)

Free fall (packaged)

1500 mm
(IEC 60068-2-32)

4.1.12  Weight and dimensions

Weight

50 g
(without connectors)

Dimensions

60 x 45 x 15 mm (LxWxH)

Mounting

via two M4 screws or 3.6mm 
cable ties

4.1.13  Ordering information

Ordering information
Mini-PLC

Mini-PLC STG-810
Art. No. 0850-0810
GTIN 4251329401320
Mini-PLC STG-820
Art. No. 0850-0820
GTIN 4251329401382

Ordering information
accessory

Connection Cable VK-16
(TTL232 <-> USB)
Art. No. 0091-0016
GTIN 4251329400187
Connection Cable VK-35 (OS)
Art. No. 0091-0035
GTIN 4251329401276
Programmer ST-Link/V2 ISOL
Art. No. 0017-0066
GTIN 4251329401269

4.2 

Documents, videos and software

Detailed information, additional documents, application 
notes and videos relating to this product are downloadable 
from www.barth-elektronik.de and www.micon-l.de

4.3 

Disposal

If you wish to finally dispose of the 
product, ask your local recycling centre 
or dealer for details about how to do 
this in accordance with the applicable 
disposal regulations.

4.4 

Conformity declaration

For the following designated product it is hereby confirmed, 
that the construction in that technical design brought by us 
in traffic corresponds to the standards specified below. In 
the event of any alternation which has not been approved 
by us being made to any device as designated below, this 
statement shall thereby be made invalid.

Description

Mini-PLC

Type

STG-810/820

Art. No.

0850-0810/820

Directive
2004/108/EG relating to-
electromagnetic
compatibility (EMC)

Applied norms:
2004/108/EG
2004/108/EC
2014/30/EU

RoHS Directive
2011/65EU

We herby declare that our 
product is compilant to the RoHS 
Directive on restriction of the use 
of certain hazardous substances 
in electrical and electronic appli-
ances.

BARTH

®

 Elektronik GmbH, Lengerich, 03.10.2016

Dipl.-Ing. (FH) D. Barth, Managing Director

Содержание Mini-PLC STG-820












Отзывы: