Bartell Global POWER BUGGY DB17, Руководство пользователя

Страница: 13 / 24

DB17, DB21
OWNER'S MANUAL
12
OIPB-B19034
RESPONSIBILITIES OF THE OWNER
Responsibilities of the Owner
Only operate this buggy if you are a qualified and authorized operator. To be qualified,
you must read and understand the operating instructions, all safety signs on the buggy, have
training including actual operation of the buggy and know the safety rules and regulations for
the job site. Only operate the buggy if it is in proper operating condition. Do not remove or
modify any part of the buggy. Perform Daily inspection and lubrication of buggy as outlined in
the daily inspection and lubrication sections of the Operator’s Manual. Report any problems
immediately.
DO NOT OPERATE THE BUGGY IF THE INSPECTION REVEALS ANY PROBLEMS.
Wear all personal protective clothing required for the operations being performed.
Mounting and Dismounting
•
Ensure the buggy is stopped before mounting or dismounting.
•
Prior to dismounting, ensure that all controls are in neutral and parking brake is set.
•
Always use “three-point contact” and face the buggy. (“Three-point contact” means that
three out of four arms and legs are in contact with the buggy at all times during mount
and dismount).
•
Clean your shoes and wipe your hands before mounting.
•
Be sure to have secure footing when and wherever you step off of the machine. Never
use control levers as a handhold when climbing on or off.
•
Never step on foot controls when climbing on or off.
Pre-Operation Inspections
Each day ensure that the Buggy is clean and all systems are functioning properly. Report any
problems immediately.
DO NOT OPERATE THE BUGGY IF THE INSPECTION REVEALS ANY PROBLEMS.
Before operation each day ensure the following:
•
All guards, side screens and panels are in place.
•
All safety and information signs are in place and legible.
•
Engine and hydraulic oil levels are correct.
•
Check for hydraulic leaks.
•
Check all operating controls for proper operation and adjustment.
•
Fuel tank is full.
•
Check speed control operation before and after starting engine for proper operation.
•
Confirm brake-holding capacity of buggy using the procedure outlined in the Function
Test section.
•
Check Tires for damage, proper inflation and security of lug nuts. (Recommended Tire
Pressure: 50 psi)