Bartec TC26ex-NI, Быстрый старт

Страница: 12 / 64

Basic safety information
TC26
ex
-NI - Touch Computer
Type B7-A2C*-****/********
6/56
Subject to technical changes.
June 2022
1.9 Co-applicable documents
All documents are available online from the following websites:
BARTEC: www.bartec.com or http://automation.bartec.de/indexE.htm
ZEBRA: www.zebra.com
In the event of an overlaps with Zebra, the instructions of BARTEC apply.
Document BARTEC Explanation
Quick Start Guide
Touch Computer TC26
ex
-NI
This Quick Start Guide describes the safety-
related information, first use and further data
of the Touch Computer TC26
ex
-NI.
Data sheet
Touch Computer TC26
ex
-NI
This technical data sheet contains the most
important explosion-relevant technical data
as well as general technical data.
Document ZEBRA Explanation
For TC26 Touch Computer

Quick Start Guide (DE/EN)
 Product Reference Guide (EN)
Instructions for commissioning, operating,
configuring, programming and maintaining of
the Touch Computer.
1.10 Definition of terms
A few abbreviations are used in the documentation.
NI = Non Incendive
is used as generic term for Zone 2 and Division 2 version
TC = Touch Computer
stands for the entire product series