Bartec BCS 3800, Руководство пользователя, Страница: 25 / 32

User Manual
Handheld Scanner BCS 3800
ex
Technical data subject to change without notice.
Issue 01/2010
Seite 17 von 21
5.2 Software Settings
The scanner is set by means of pre-defined programmable codes. The original manual
from HAND-HELD Products for the “Industrial Hand-Held Linear Imager 3800i” can be
used for these settings.
Diverse parameters can be set with the programmable codes in this manual
e.g.
the interface parameters for RS-232 or RS-422.
enable, disable and settings for the different bar code types
settings for the scanner such as volume, trigger mode, time out
RESET for resetting the scanner to the factory settings
data editing e.g. prefix and suffix
data format
5.3 Resetting to Factory Settings
See Chapter 5.2
The handheld scanner is reset with the aid of the pre-defined HAND-HELD Products
programming manual for the “Industrial Hand-Held Linear Imager 3800i`”.
You will find the default settings in this manual too.