Bartec BCS 3800, Руководство пользователя

Страница: 18 / 32

User Manual
Handheld Scanner BCS 3800
ex
Technical data subject to change without notice.
Issue 01/2010
Seite 10 von 21
(13) Connect the voltage supply cable to the all-pole mains disconnecting switch
and/or fuse.
(14) Switch on the voltage supply.
(15) Check if the laser beam comes from the handheld scanner when the trigger is
actuated.
(16) Program the handheld scanner to the interface parameters by means of the bar
codes in the programming manual.
Note
The maximum length of the connection cable from the power pack to the
handheld scanner is 7.9 m
The shielded connection cable from the handheld scanner is 2.1 m long and is
included in the scope of supply.
.
Illustration 4-1: Connection Power Pack to BCS 3800 ex
Permissible connection cable diameters
Type Ex protection type Cable diameter
Cable gland Ex e
M20 x 1.5 (black)
ESKE-e20 II 2GD Ex e II 6 – 13 mm
Cable gland Ex e
M16 x 1.5 (black)
ESKE-e16 II 2GD Ex e II 4 – 9 mm
Cable gland Ex i
M16 x 1.5 (blue)
ESKE-i16 II 2GD Ex e II 4 – 9 mm
4-pin connector
4-pin socket