Bartec BCS 3800, Руководство пользователя

Страница: 16 / 32

User Manual
Handheld Scanner BCS 3800
ex
Technical data subject to change without notice.
Issue 01/2010
Seite 8 von 21
Laser-equipped device products from HAND-HELD Products conform to the US 21
CFR 1040,10 standards as well as EN 60825-1.. The classification of the laser device
is specified on a label attached to the device. Class 1 laser devices are classified as
not hazardous if used in the manner intended. The following declaration is required to
comply with American and international legislation:
Caution!
The use of controls, adaptations or the application of procedures that do not
agree with the instructions described here can lead to a hazardous exposure to
radiation.
Class 2 laser devices operate with a visible low-voltage light diode. As with any bright
source of light, for example the sun, the user should avoid looking directly into the light
beam. However, momentary or brief exposure to a Class 2 laser is not considered
harmful.
3.3.1 International
The device meets internationally recognised standards for the exposure of people to
electromagnetic fields from radio equipment.
Reduction of high frequency energy - use in accordance with the intended purpose
Use the device only in accordance with the provided instructions.
3.3.2 Handheld Devices
To conform to the FCC RF Directives, the cable that is connected to the handheld
scanner must be produced with shielding. The cable label must be attached to the
housing on the connector or socket.
3.4 Health and Safety Recommendations
Danger!
Use only accessories approved by BARTEC. All components must be dry before
they may be connected to an external power supply.
3.2 Laser Devices
3.3 Electromagnetic Fields