TECH600 User Guide
2020
7 |
P a g e
B
EFORE
G
ETTING
S
TARTED
1.
Charging
NOTICE: Only use the power supply or USB cable that is included in the TECH600 tool kit to
charge this tool. The use of un-approved power supplies may damage it and will void the tool
warranty.
2.
Registration
The Bartec TECH600 can be registered through the TPMS Desktop software, found at
. This allows the user to update the tool to the latest software through
the method they prefer.
3.
Update
Once the tool is registered through TPMS Desktop, verify the software level loaded to the level
available online and update the tool if necessary. Updating through the TPMS Desktop is
recommended.
4.
Disconnecting from PC
NOTICE: Before disconnecting the tool from a PC, please ensure to “safely
remove
hardware”
first
, by locating the “Safely Remove Hardware” icon on the lower right hand side of the PC
screen. This will prevent the data on the tool from being corrupted.
K
IT
C
OMPONENTS
The TECH600 kit inside the tool box includes:
•
TECH600 TPMS activation tool
•
Bluetooth (BT) OBDII Module
•
Qi Charging cradle
•
USB cable
•
Tool case
Identifying Kit Components and Features
The TECH600 tool is battery operated and generates a low-frequency magnetic field to
activate tyre sensors. It receives UHF radio signals from the tyre sensors typically at 434MHz.
USB Cable
BT OBDII
Module
TPMS
activation
tool
Qi Charging cradle
Tool case
Содержание ALCAR TECH600
Страница 31: ...TECH600 User Guide 2020 31 P a g e...