Operating Instructions
Lamp module
Type 07-3353-31.3
BARTEC
GmbH
Max-Eyth-Straße 16
D-97980 Bad Mergentheim
Tel.: +49 7931 597-0
Fax: +49 7931 597-119
[email protected]
www.bartec.de
Reservation
Technical data subject to change without notice. Changes, errors and
misprints may not be used as a basis for any claim for damages.
1/3
Lamp module with connection cable
Explosion protection
Technical data
Description
These lamp modules are used everywhere
in Group IIC, Zone 1 hazardous areas where
machine functions are to be activated by
pressing a button and the functional status
of the respective machine is to be indicated
visually.
Each actuating element is fitted into a
mounting hole on a control console or panel.
The respective lamp module is then fas-
tened without tools to the actuating element
and secured with a fixing nut (see following
pages for assembly).
The easy installation of the actuators in the
control console or panel allows conformance
to a high IP degree of protection.
Dimensions
in mm
0
1-3353-7D0004-08/12-STVT-345343
Ex protection type
II 2G Ex d IIC T6
0044
Certification
PTB 97 ATEX 1065 X
Ambient temperature
-40 °C to +50 °C
Storage, transport: -55 °C to +70 °C
approved for Zone
1
Protection class
determined by actuating element and
additional enclosure.
Lamp module up to IP 67 in combination
with actuating element
PTB 00 ATEX 3114 U.
Weight
approx. 180 g (without connection
cable)
Rated insulation voltage
300 V
Power consumption
< 1 W
Rated operating voltage (Ue)
AC 12 V to 250 V
(T
a
< +50 °C)
DC 12 V to 60 V
(T
a
< +50 °C)
AC/DC 12 V to 24 V
(T
a
< +60 °C)
Enclosure material / manufacturing process
Thermoplastic / injection moulding
Connection
integrated connection cable, 3 m
ø 6.4 mm, 2 x 0.75 mm
2
Lamp
LED (red, green, yellow, white, blue)
Illumination
very bright, visible angle up to 180°
Service life
electrical > 10
5
running hours
Mounting
locked, by bayonet lock
