BARTEC BENKE HYGROPHIL F 5673, Руководство по эксплуатации, Страница: 11 / 129

System description
1-5
HYGROPHIL® F 5673 Operating manual, Software version 1.8.x, 387896MDHEN(14.06.2013)
Key functions
Indication of the water vapour content [Vol%], optional relative humidity [RH]
(see section 4.3.1.3)
Indication of the water vapour content in parts per million volume or in parts
per million weight
Indication of the Dewpoint Temperature
Indication of the Frost Point Temperature
Indication of the Moisture Content [mg/m
3
] or [lb/MMscF]
Indication of the water Vapour Pressure
Selection of the measurement channel (see section 4.3.1.2)
Indication of the temperature at the measuring point (True Temperature)
Indication of the pressure at the measuring point (Sample Pressure)
Indication of the Wave Length
(1) In the entering mode or programming mode, these keys serve to enter
numerical values.
Trigger the sensor equalizing (see section 4.2)
Call up the history setup (see section 4.3.5.1)
Switch from online graphic mode to history graphic mode (see section 4.3)
(2) If these two keys are not labelled with F1 and F2 at your measuring de-
vice, this does not mean its functional range is restricted. The function of
the keys is available anyhow.
Display of warnings and error messages
Call up the programming mode (see section 5.2)
Selection keys (see section 5.3),
Switch between the display modes (see section 4.3)
Change the cursor position in entry fields (see section 5.4.3)
(1)
VOL%
1
PPM
2
DT
3
FP
4
MC
5
VP
-
CH1
6
CH2
7
CH3
8
TT
9
SP
0
WL
,
(2)
F1
F2
HELP
PROG