Distillation Process Analyzer DPA-4.5
Installation and preparation for commissioning
6 Installation and preparation for commissioning
WARNING
Danger of explosion
Petrochemical products can leak. The liquid
evaporates and forms an explosive atmosphere
when it mixes with air.
Highly flammable liquids can start fires which can
cause severe or fatal injuries.
For this reason:
– Do not use open flames or ignition sources.
– Take measures to prevent electrostatic charging.
– Do not use any tools which cause sparks.
– Additionally used devices and all electrical
connections within the danger area must be
protected against explosions in accordance with
ATEX (Directive 94/9/EC).
– Written permission (hot work permit) must be
obtained for all work with flames or hot materials.
– Keep a fire extinguisher at close hand.
– Stop work at once in the event of fire. Leave the
danger area until the all-clear signal is given.
WARNING
Danger due to incorrect installation and
commissioning!
Installation and commissioning must be conducted
by trained specialist personnel who have adequate
experience. Errors in installation can lead to life-
threatening situations or considerable material
damage.
For this reason:
– Have installation and preparations for
commissioning conducted solely by specialists
for potentially explosive atmospheres or by
qualified electricians.
– If the location of the device is to be changed
later, consult the manufacturer.
– Do not install or relocate the device yourself.
82
December 2013