Viewing Videos
Videos can not be viewed on the screen on the camera. To view videos you must
connect the camera to a computer through the included USB cord. The camera is
in USB mode when connected to computer’s USB port. The SD-card then
functions as a removable disk
Upgrading Software
This camera is equipped with an automatic upgrade function. The upgrade
function is only activated when the camera is connected to the computer with
internet and upgrading is only needed when an improved firmware is available.
WARNING: Upgrading is risky, please be cautions
Technical Specifications
Picture Resolution
Real 6MP
Lens
F/NO=3.0 FOV(Field of View)=52°
IR-Flash
6-12m
Display Screen
1.5” LCD
Memory Card
From 8 MB to 32GB
Video Resolution
VGA(16fps) ; QVGA(20fps)
PIR Sensor
Multi Zone
PIR Sensitivity
Adjustable (High/Normal/Low)
Trigger Time
1.2 second
Weight
0.25 kg / .5 lbs
Operation/Storage Temperature
-20 - +60°C / -30 - +70°C
-4 - +140°F / -22 - +158°F
Interval
1s – 60 min.
Photo Burst
1–3
Video Length
1–60 seconds
Power Supply
8×AA
Stand-by Current
< 0.25 mA (<6mAh/Day)
Power Consumption
600 videos
(interval=5min,video length=10s);
Low Battery Alert
LED Indicator
Display Screen
LCD display on camera
Mounting Options
Belt, Rope Or Tripod
Dimensions mm
128 x 98 x 78
Operation Humidity
5% - 90%
Product design and specifications are subject to change without notice
www.barska.com
6MP Trail Camera
10
www.barska.com
6MP Trail Camera
11
CAUTIONS
- The camera has no internal memory, insert SD card before operation; otherwise, the
camera will shut down automatically if NO SD card is inserted
- Please unlock the write-protect before inserting the SD-card
- Insert the SD-card when the power switch is in the OFF position before testing the camera
- Do not insert or take out the SD-card when the power switch is in the ON position
- Format the SD-card by the camera when used for the first time
- The camera is in USB mode when connected to computer’s USB port. The SD-card
then functions as a removable disk
- In the SETUP mode, if nothing is done in 3 minutes the camera will shut down
automatically
- Make sure having sufficient power to upgrade firmware; otherwise the upgrade will be
interrupted. If any fault occurs after an improper upgrading process, the camera may stop
functioning properly
