User’s Manual for Keypad Safe
WARNING
Read all instructions before using this safe.
A
G
F
B
C
A. Initialization Button
B. Bolts
C. Battery Compartment
D. Handle
E. Emergency Key Access
F. Indicator Lights
G. Keypad
* Actual model may vary
-Test registered pin code a few times before closing
the safe door.
- Avoid leaving door open and unattended; it will allow
unauthorized individuals to reprogram the safe,
gaining full access to the safe and its contents.
- Test the Emergency Keys and store them in a secure
place, NOT inside of the safe.
- Test and make sure the safe works properly
before mounting.
- Mount the safe before use because the safe has a
small base with a heavy door, and will tip forward if
not properly mounted.
- Keep children away from safe; they should not play
with or around the safe at anytime. Children at play
could accidentally get locked inside the safe or
accidentally pull on the safe door causing safe to tip
over if not properly mounted.
- Failure to follow these warnings could result in serious
injury or death.
NOTE: BARSKA is not responsible for any damage or
lost contents in the safe due to moisture.
NOTE: BARSKA is not responsible if the safe is stolen
or contents in the safe.
GETTING STARTED
1. Remove Emergency Keys from accessory package
2. To expose the Emergency Key access, remove Logo
Plate screws with provided tool
3. Insert Emergency Key into key access, push and turn
counter-clockwise
4. Turn Handle clockwise to open the safe
INSTALL BATTERIES
1. Remove Battery Compartment cover
2. Insert 4 AA batteries and restore battery cover
FACTORY DEFAULT MODE \ CREATING A
PERSONAL PIN CODE
Safe retains two 4-6 digit pin code.
Register first pin code
Press initialization button then enter desired pin code
and press “*” when finished 4-6 digits.
Register second pin code
Press 00 and then press. Then, enter desired pin code
and press “*” when finished 4-6 digits.
TESTING PERSONAL PIN CODE
1. With the safe door open and the Bolts extended in
the locked position, enter in your personal pin code
on the Keypad and press the “#” symbol.
2. Turn the Handle.
If pin code was registered correctly the Bolts will retract.
If pin code was NOT registered correctly the Bolts will
stay in the locked position.
If pin code was NOT registered correctly repeat steps in
“FACTORY DEFAULT MODE \ CREATING A
PERSONAL PIN CODE”.
3. Test a pin code that is not registered to ensure the
Bolts will stay in the locked position.
OPENING & CLOSING SAFE WITH PERSONAL PIN
CODE
OPEN:
1. Enter in your personal pin code on the Keypad and
press the “#” symbol.
2. Turn the Handle clockwise to the unlock and pull the
safe door open.
CLOSE:
To close safe, close door and turn Handle counter
clockwise to the lock position.
CHANGING PERSONAL PIN CODE
Follow steps in “ FACTORY DEFAULT MODE \
CREATING A PERSONAL PIN CODE ”
LOCK OUT MODE
When the wrong pin code is entered 3 consecutive
times lock out mode will activate for 5 min; safe cannot
be used during this time; please wait or open with
emergency keys.
See reverse side for more information
1
2
3
4
5
6
7
8
9
0
#
E
H
D
Lock
Unlock
©2024 BARSKA® | Pomona, CA 91767 | www.barska.com
3/24
BC707
