Barry-Wehmiller Thiele Streamfeeder HV, Руководство пользователя

Страница: 24 / 46

17
A
uto
S
treAm
HV m
AnuAl
Inspection
Read this section to learn how to:
• Visually inspect and maintain the equipment to prevent any
operational problems or to detect part problems which may
require adjustment, replacement or cleaning.
• Perform cleaning of belts, o-rings and sensors.
• Advance or replace o-rings.
• Replace belts.
Do not attempt to make any adjustments while
the equipment is running. Serious injury can
be caused by exposure to moving parts.
Do not wear loose clothing when operating the
equipment.
When performing inspection and maintenance,
always make sure to turn off the main power
switch and disconnect the equipment from the
power source. Failure to do so can cause the
risk of an unintentional start-up and therefore
moving parts which can cause serious injury.
Any attempt to make adjustments while
equipment is in operation could cause serious
injury and potentially damage equipment or
parts.
4
Inspection and Care
Check for Damaged Feed or Discharge Belts
Check for visual signs of:
• Stretching. Replace as required.
• Thinning or cracking. Replace as required.
• Worn. Replace as required.
Advance or Replace Damaged O-Rings
Check for visual signs of:
• Stretching. Advance or replace as required.
• Thinning or cracking. Advance or replace as required.
• Worn. Advance or replace as required.
Ensure Proper Feed and Discharge Belt Tracking
Check for visual sign of:
• Walking. Adjust as required.
• Improper roller alignment. Adjust as required.