Barry-Wehmiller Accraply 204RH, Руководство по эксплуатации и обслуживанию

Страница: 10 / 97

2 SECTION 1: SYSTEM OPERATION
1.1.4 Machine Safety Labels
This machine is equipped with safety labels. These safety labels are placed on the machine to identify areas that may
be hazardous to the personal safety of the operator. Read, Understand and Follow these safety notices.
The descriptions in this manual cover warning labels for machines that are covered by different regulatory codes and
standards. Thus, every label described in this section is not found on every machine. Safety label descriptions for
special/extra equipment on the machines is found in the Original Equipment Manufacturer manuals that are sent to the
customer.
The safety labels used on the machines may use signal words. Each signal word is colour coded.
Background Colour Label (not actual size) Description
Red
DANGER indicates an imminently hazardous situation which, if
not avoided will result in death or serious injury.
Orange
WARNING indicates a potentially hazardous situation which, if
not avoided could result in death or serious injury.
Yellow
CAUTION indicates a potentially hazardous situation which, if
not avoided may result in minor or moderate injury.
Safety labels can wear out. To obtain replacement safety labels for your machine, please contact our Parts Department
ACCRAPLY CANADA INC.
Parts Department
3070 Mainway Drive, Units 16-19
Burlington, Ontario L7M 3X1 Canada
Phone:
(905) 336-8880
Fax: (905) 335-5988
ELECTRICAL ENCLUSURES
Name Figure Part # Approx. Size Label (not actual size)
Electrical Shock/
Electrocution
6010B-iso 850474 2” x 2-1/4”
6010C-iso 850475 1-1/4” x 1-3/8”
This label is used to mark electrical enclosers that do not clearly show
that they contain electrical devices and for enclosures that have a main
power switch and or a power cord.
SAFETY PROCEDURES