Barrus Shire 15 70WB страница 82 Скачать руководство пользователя | Manualshive

Страница: 82 / 93

background image

RDG603A81

– Issue 2

Page 82 of 93

SECTION 13: DISPOSAL CONSIDERATIONS

General information
Waste to be treated as controlled waste. Disposal to licensed waste disposal site in accordance with local Waste Disposal Authority.

13.1. Waste treatment methods

Dispose of waste and residues in accordance with local authority requirements.

SECTION 14: TRANSPORT INFORMATION

General

The product is not covered by international regulation on the transport of dangerous goods (IMDG, IATA,
ADR/RID).

14.1. UN number

Not applicable.

14.2. UN proper shipping name

Not applicable.

14.3. Transport hazard class(es)

Not applicable.

14.4. Packing group

Not applicable.

14.5. Environmental hazards

Environmentally Hazardous Substance/Marine Pollutant
No.

14.6. Special precautions for user

Not applicable.

14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code

Not applicable.

SECTION 15: REGULATORY INFORMATION

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture

Uk Regulatory References
Health and Safety at Work Act 1974.
Environmental Listing
The Pollution Prevention and Control Act 1999. Special Waste regulations 1996. Control of Pollution (Oil Storage) (England) Regulations
2001
Statutory Instruments
The Chemicals (Hazard Information and Packaging for Supply) Regulations 2009 (S.I 2009 No. 716).
Approved Code Of Practice
Safety Data Sheets for Substances and Preparations.
Guidance Notes
Workplace Exposure Limits EH40.
EU Legislation
Dangerous Preparations Directive 1999/45/EC. Dangerous Substance Directive 67/548/EEC. Regulation (EC) No 1907/2006 of the
European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation
(EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives
91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC, including amendments. Regulation (EC) No 1272/2008 of the European Parliament
and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing
Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006 with amendments.

15.2. Chemical Safety Assessment

No chemical safety assessment has been carried out.

«
...
80
81
82
83
84
...
»

Содержание Shire 15 70WB






























































































Отзывы:

Нет отзывов

Похожие инструкции для Shire 15 70WB

Бренд: Yamaha Страницы: 76

Бренд: Sun Microsystems Страницы: 74

Бренд: Aaeon Страницы: 97

Бренд: Quick Страницы: 32

Бренд: JETWAY Страницы: 38

Бренд: Texas Instruments Страницы: 24

Бренд: AKM Страницы: 30

Бренд: TYAN Страницы: 90

KEMX-1600 Series

Бренд: Quanmax Страницы: 74

Бренд: Analog Devices Страницы: 17

Бренд: Intel Страницы: 26

Бренд: MSI Страницы: 104

Бренд: Gigabyte Страницы: 31

Бренд: Atmel Страницы: 39

Бренд: Gigabyte Страницы: 37

Бренд: Embedian Страницы: 70

Бренд: Gigabyte Страницы: 112

Бренд: ASROCK Страницы: 162

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды