Barrus Shire 15 70WB Скачать руководство пользователя страница 74

Страница: 74 / 93

RDG603A81

– Issue 2

Page 74 of 93

1.5.8

Noise

1.5.9

Vibrations

1.5.10

Radiation

1.5.11

External radiation

Yes

1.5.12

Laser radiation

Not applicable

1.5.13

Emissions of
hazardous materials
and substances

Yes

*11

Yes

*11

Except for the exhaust, fuel, and cooling water system which needs to be properly

connected by the boat builder or installer according to the Shire Manual.

1.5.14

Risk of being trapped
in a machine

Not applicable

By boat builder/installer.

1.5.15

Risk of slipping,
tripping or falling

1.5.16

Lighting

1.6 MAINTENANCE
1.6.1

Machinery
maintenance

Yes

1.6.2

Access to operating
positions and
servicing points

Not applicable

By boat builder/installer.

1.6.3

Isolation of energy
sources

1.6.4

Operator intervention

1.6.5

Cleaning of internal
parts

Yes

1.7 INFORMATION
1.7.1

Information and
warnings on the
machinery

Yes

*12

Yes

*12

A ‘Refer to manual before carrying out engine installation, operation and maintenance’

label is fitted to the engine. ‘Hot Surface’ warning stickers are fitted on surfaces that may
become hot during operation. All other protection or warnings to be made by the boat
builder/installer.

1.7.1.1

Information and
information devices

Yes

*13

Yes

*13

The control panel is simple to understand and use. Other control measures and

information on the use of the machinery is to be carried out by the boat builder/installer.

1.7.1.2

Warning devices

Yes

*14

Yes

*14

The control panel provides warnings. The location and installation of the control panel is

to be carried out by the boat builder/installer.

1.7.2

Warning of residual
risks

By boat builder/installer.

1.7.3

Marking of machinery

Yes

*15

The engine is CE marked with a brand, model designation and serial number. Full CE

compliance to be carried out by the boat builder/installer.

1.7.4

Instructions

Yes

1.7.4.1

General principles for
the drafting of
instructions

Yes

*16

Yes

*16

For (a) and (b). The boat builder/installer to comply with (c) and (d) for the total machine

and use of it

1.7.4.2

Contents of the
instructions

Yes

*17

Yes

*17

For (a), (b), (d), (e), (g), (h), (i), (k), (p), (r), (s), (t). The boat builder/installer to comply

with (c), (d), (f), (g), (h), (i), (j), (l), (m), (n), (o), (q), (u), (v).

1.7.4.3

Sales literature

Yes

Содержание Shire 15 70WB






























































































Результаты поиска

Содержание Shire 15 70WB

Отзывы:

Barrus Shire 15 70WB, Руководство пользователя, Страница: 74 / 93

Результаты поиска

Содержание Shire 15 70WB

Отзывы: