Barrus Shire 15 70WB страница 6 Скачать руководство пользователя

Страница: 6 / 93

RDG603A81

– Issue 2

Page 6 of 93

WARRANTY CLAIMS

Warranty claims shall be made by an authorised dealer or boat builder.

The dealer or boat builder will then arrange for the inspection and any necessary repairs. If

the repairs carried out are not covered by the warranty, the purchaser shall pay for all related

labour and material, and any other expenses associated with that service.

WHAT IS NOT COVERED

This limited warranty does not cover routine maintenance items, adjustments, normal wear

and tear, damage caused by abnormal use, operation of the product in a manner inconsistent

with the recommended

operation/duty cycle section of the Owner’s Manual, accident,

submersion, improper installation (proper installation specification and techniques are set

forth in the Operations and First time running sections in this manual), use of an accessory

or part not manufactured or sold by us, or alteration or removal of parts. Expenses related

to crane-out, launch, towing, storage, telephone, rental, inconvenience, slip fees, insurance

coverage, loan payments, loss of time, loss of income, or any other types of accidental or

consequential damages are not covered by this warranty.

Engine electrical systems fitted with alternator boost charge systems or any other electrical

management systems are not covered by warranty.

Engine and fuel equipment is not covered by warranty if bio-diesel that does not comply with

EN15940 is used in the fuel system (See

5. Refuelling of Section 6

– Operation

). Also, if

no type of water trap is incorporated into the fuel system.

Engine and engine starting systems are not covered by warranty if it is found that the engine

start battery is of the incorrect specification as stated in

1. Engine Data of Section 10 -

Technical Data

Damage due to rust or corrosion, submersion, or unreasonable exposure to the environment,

such as exposure to high humidity, rain fall, or seawater, or conditions resulting in the freezing

of cooling water are also not covered.

Engine and engine starting systems are not covered by warranty if it is found that the engine

start battery is either partially or fully discharged.

The standard alternators fitted to Shire engines are not suitable for charging lithium-ion

batteries. If the standard alternators are used for charging lithium-ion batteries, they will not

be covered under warranty. If lithium-ion batteries are to be used a specialist alternator will

be required.

Содержание Shire 15 70WB






























































































Результаты поиска

Содержание Shire 15 70WB

Отзывы:

Похожие инструкции для Shire 15 70WB

Бренды по названию

Популярные бренды

Barrus Shire 15 70WB, Руководство пользователя

Результаты поиска

Содержание Shire 15 70WB

Отзывы:

Похожие инструкции для Shire 15 70WB

Бренды по названию

Популярные бренды