background image

20RTK – 23RTK OWNER’S MANUAL                  12/8/21                                  Page 1 of 18 

                                                        THE 

            

  

MODEL 20RTK – 23RTK 

STAND ON HYDRAULIC TRACK TRENCHER 

                                           OWNER’S MANUAL 

 

 
 
CONGRATULATIONS! 
 
You are now the proud owner of the BARRETO trencher. The OPERATOR’S MANUAL is attached to 
the machine. Please study it and this manual to become familiar with the trencher, its characteristics, and 
method of operation. Pay particular attention to the safety and operating instructions to prevent personal 
injury or equipment damage.   
 
If you have any questions or need any replacement parts in the future, please contact us at your 
convenience. Our toll-free phone number, fax and email are listed below. 
 
THANK YOU for your patronage and confidence in BARRETO equipment. 
 
Barreto Manufacturing, Inc. 
Innovative Equipment Engineered to Last 
66498 Hwy 203, La Grande, OR  97850 
(800) 525-7348    (541) 963-7348 
FAX (541) 963-6755 
E-Mail

[email protected]

 

Web Site

http://www.barretomfg.com

 

US Patent# 9,988,084 
 
 
 

Machine Identification Record 

 

Machine model number  

________________________ 

 
Machine serial number   

________________________ 

 
Engine manufacturer      

________________________ 

 
Engine model number    

________________________ 

 
Engine serial number     

________________________ 

Содержание 20RTK



















Отзывы: