IM_01_rev.1
SERIES NORMA 600 - 15U UP TO 33U
28x
M5x10bolt
32x
M6x12bolt
16x
M8x12 bolt
16x
M8 flange
nut
4x
key
4x
M12 adjustable
feet
Safety warning – Do not climb on, rock,
shake your rack. Only someone with good
mechanical skill and who has experience
should install this rack. Never exceed the
maximum load capacity. If you didn’t
understood this instructions manual
please contact us by [email protected]
In this first step you will need the top cover (5), the
bottom plate (8) and 2 x frame (6). Put the two parts of
frame ready to assemble this part like picture with 16 x
bolt M8*12 (C) and 16 x flange nut M8 (D);
With the cabinet in the vertical, assemble the mounting
angle (4) with 16 x bolt M6*12 (B) in the horizontal sides
of the cabinet;
Grab the 19’’ rails (3) in the vertical and mount with 16 x
bolt M6*12 (B);
With the cable entry panel (9) and with the castors (10),
assemble in the bottom plate with 24 x bolt M5*10 (A);
1
2
1
2
