Barox Kommunikation RY-LGSP23-10G, Руководство пользователя, Страница: 257 / 383

barox Kommunikation
Publication date: Sept, 2015
Revision A1
246
3-3.5 SFP Information
The section describes that switch could display the SFP module detail information which you
connect it to the switch. The information includes: Connector type, Fiber type, wavelength,
baud rate and Vendor OUI etc.
Web Interface
To Display the SFP information in the web interface:
1. Click Monitor, then SFP Information
2. To display the SFP Information.
Figure 3-3.5: The SFP Information Overview
Parameter description:

Connector Type:
Display the connector type, for instance, UTP, SC, ST, LC and so on.

Fiber Type:
Display the fiber mode, for instance, Multi-Mode, Single-Mode.

Tx Central Wavelength:
Display the fiber optical transmitting central wavelength, for instance, 850nm, 1310nm,
1550nm and so on.

Baud Rate:
Display the maximum baud rate of the fiber module supported, for instance, 10M, 100M, 1G
and so on.

Vendor OUI:
Display the Manufacturer's OUI code which is assigned by IEEE.