Baroness LS62, Руководство по эксплуатации для владельца

Страница: 30 / 37

Greasing
About Greasing
Since there may be adhesion or damage due
to lack of grease on moving parts, they must
be greased.
Add urea-based No. 2 grease in accordance
with the Maintenance Schedule.
Other locations where the specified grease or
lubricant is used are indicated in "Greasing
Points".
Add grease using the specified grease or
lubricant.
Greasing Points
Grease nipples are installed in the following
locations.
Add grease every 50 hours of operation.
However, for locations where a time is
specified, add grease according to that
schedule.
2
1
2
3
1
3
8bq62b-279
Greasing Points_001
Location
No. of
greasing
points
1 Front roller shaft 2
2 Housing 2
3 Rear roller shaft 2
Front roller shaft
There is one point each on the left and right
of the front roller shaft.
Left end of front roller
8bq62b-280
Greasing Points_002
Right end of front roller
8bq62b-281
Greasing Points_003
Housing
There is one point each on the left and right
of the housing.
Hydraulic motor housing side
8bq62b-282
Greasing Points_004
1.
2.
LS62
・
LS66
Maintenance
Page 5-4
Greasing