Baroness LS62, Руководство по эксплуатации для владельца

Страница: 25 / 37

Adjustment of Scraper
Adjustment of Front Scraper
Note:
Depending on the specifications, this function
may not be available.
Important
Do not place the scraper in contact with the
front roller too tightly.
It will cause deformation of the scraper and
damage of the front roller.
The scraper prevents grass clippings, etc.,
from attaching to the front roller.
Loosen the left and right bolts of the
scraper.
1 3 4 2
t4n31r-004
Adjustment of Front Scraper_001
1 Scraper
2 Bolt
3 Washer
4 Spring washer
Adjust the scraper so that there is a
clearance of 2.0 to 3.0 mm (0.079 to 0.118
in) between it and the outer diameter
surface of the front roller, and then firmly
tighten the loosened bolts and nuts.
1
2
A
t4n31r-005
Adjustment of Front Scraper_002
1.
2.
1 Scraper
2 Front roller
A 2.0 - 3.0 mm (0.079 - 0.118 in)
Adjustment of Rear Scraper (Wire Type)
Note:
Depending on the specifications, this function
may not be available.
Important
Do not place the scraper in contact with the
rear roller too tightly.
It will cause the scraper break and slack.
The scraper prevents grass clippings, etc.,
from attaching to the rear roller.
Loosen the left and right lock nuts and nuts
of the scraper.
Adjust the scraper so that there is a
clearance of 2.0 to 3.0 mm (0.079 to 0.118
in) between it and the rear roller, and then
secure it with the lock nuts.
A
1
2
3 4
t4n31r-006
Adjustment of Rear Scraper (Wire Type)_001
1 Scraper
2 Rear roller
3 Nut
4 Lock nut
A 2.0 - 3.0 mm (0.079 - 0.118 in)
1.
2.
Handling Instructions
LS62
・
LS66
Handling Instructions
Page 4-11
Adjustment before Work