Technical Information Leaflet
TIL: 013
LM56/66
Height of Cut Adjustment
Страница 1: ...Technical Information Leaflet TIL 013 LM56 66 Height of Cut Adjustment...
Страница 2: ...no groomer is fitted then this screw is not used Height of Cut Setting Screw This end of this screw as shown needs to be adjusted so that it measures the same distance as the desired groomer setting...
Страница 3: ...side of the adjusting screw head resting on the cutting edge of the bottom blade Raise the front roller up by twisting the height of cut adjuster nut anti clockwise Make sure that you do this on both...
Страница 4: ...ller as shown Make sure that this setting is achieved on both ends of the bottom blade If the front roller is adjusted correctly you should be able to slide the setting bar out from this position with...
